products - Continental belts

vee beltsvee belts

Industrial Belts Corporation are the authorized distributors, dealers, stockists & suppliers for the products of CONTINENTAL brand. The CONTINENTAL brand products are Rubber Belts, Poliurethane Belts.

Download list of Dimensions Click Here!

conti synchrochain®

conti-synchrochain

conti synchrochain – with its newly developed CTD profile, original design and selected materials – ensures reliable power transmission for high torques and high dynamic stressing. As the first belt of this high performance class it permits reverse flexing in multipulley drives and is the optimum alternative to chain drives.

Areas of application - Conti Synchrochain has been developed for extreme applications where large power outputs, high torques and high speeds have to be reliably transmitted or high dynamic stressing is in use. There is virtually no limit to the application possibilities.

Thanks to the resistance to dampness, aggressive cleansing agents and temperature fluctuations, the belt lends itself to use in the packing industry, in conveyor systems and in general drive applications all the way through to go-carts.

conti synchroforce® supreme

conti synchroforce® supreme

Supreme was specially developed for heavy-duty drive performance. Its compounding guarantees unsurpassed fatigue strength under re- versed bending stresses together with high wear resistance. It paves the way to previously unknown performance levels at belt speeds of up to 60 m/s, while also offering the proven advantages of the CONTI SYNCHROFORCE rubber timing belt line.

Areas of application - Conti Synchroforce Supreme heavy-duty timing belts are used wherever heavy loads are transmitted at high belt speeds.

conti synchroforce® extreme

conti synchroforce® extreme

To deal with the impact loads occurring in the case of abrupt acceleration and deceleration, the CONTI SYNCHROFORCE EXTREME employs a compound that is highly resistant to elon- gation and tearing. This compound reliably absorbs even maxi- mum surges and guarantees the maintenance free functioning of the belt in continuous service. A specially finished fabric provides top wear and abrasion resistance.

Areas of application - Conti Synchroforce EXTREME heavy-duty timing belts are specially developed for drives subject to impact loads and high acceleration forces.

conti synchroforce® cxp

conti synchroforce® cxp

Conti Synchroforce CXP heavy-duty timing belt is used wherever high outputs have to be synchronously transmitted. Thanks to its high resistance to wear, it can be used in virtually any high-output industrial application. It requires no maintenance even when used in continuous operations. The multitude of sections, with a total of four pitches, covers a wide performance range and makes for maximum costefficiency in a design as compact as requirements allow.

Areas of application - Conti Synchroforce CXP heavy-duty timing belts are used where large power outputs, high torques or high speeds have to be reliably transmitted.

conti synchroforce® cxa

conti synchroforce® cxa

Conti Synchroforce CXA was developed especially to transmit high torque at moderate belt speeds (up to 20 m/s). The fully new N-DURO compound provides for exceptional component adhesion and ensures a previously unknown level of wear resistance and service performance. In addition to offering high tear resistance, the Conti Synchroforce CXA is the ideal selection for transmission of high torques at belt speeds of up to 20 m/s. It exhibits the proven advantages of the Conti Synchroforce line and the extremely relible.

Areas of application - Conti Synchroforce CXA heavy-duty timing belts forsustained transmission of high torque at low speeds in horizontal conveyance technology and machinery construction.

conti synchrobelt®

conti synchrobelt

Conti Synchrobelt timing belts enable economic drive solutions in the lower and middle performance range in wellproven quality. The wide variety of metric profiles and trapezoidal profiles allows very different applications.

Areas of application - Conti Synchrobelt timing belts are used in the lower and middle performance range and are suitable for use even if the belt drive may not be conductive.

conti synchroline®

conti synchroline

Conti Synchroline was developed for use in automatic door opening systems. Its excellent length stability ensures high operational reliability and a long maintenance free service life. As a lifetime product it is very hard-wearing and its matched materials ensure it runs smoothly in continuous operations. It is easy to handle and to mount. It enjoys reliable in service behaviour even under frequent load changes.

Areas of application - Conti Synchroline is used in automatic door opening systems.

conti synchrotwin®

conti synchrotwin

Conti Synchrotwin double-sided timing belt is a drive element that allows opposing motion drives even in high output classes. The heavy-duty versions CXP for high rpm rates and CXA III for high torques are characterized by their constant length and the teeth's high resistance to deformation. The standard version allows a particularly economic synchronous power transmission on both sides in the lower and middle performance range.

Areas of application - Conti Synchrotwin doublesided timing belts are suitable for same direction and opposing rotary movements. They hence enable compact space and weight-saving drives with an efficiency of up to 98%.

conti synchrodrive®

conti synchrodrive

Conti Synchrodrive timing belts enable a wide range of customer-specific drive solutions from linear engineering to individual transport solutions. A large variety of versions and adaptation possibilities ensures universal application in very different fields.

Purpose-designed for the realisation of self-guiding systems, the nubbed belt N10 completes the Synchrodrive belt series. Its high tracking stability means there is no need to fit side flanges. The nubbed belt stays in complete contact with the pulley and ensures the positive meshing of the teeth in both senses of motion.

Areas of application - Conti Synchrodrive timing belts open up areas of application in linear and transport engineering as well as in lifting systems, car washes and positioning of door and gate opening systems. The CONTI SYNCHRODRIVE N10 nubbed belts allow new areas of application in linear and transport engineering, e.g. for Plotters.

conti synchrocolor®

conti synchrocolor

The new generation of the Conti Synchrocolor series with increased power potential was developed specifically for the conditions encountered in painting lines and skid units. Thanks to their distinctive and silicone-free material compounding and purity of the surface, Conti Synchrocolor timing belts do not contain any wetting agents that damage paintwork. Purpose designed for the realisation of self guiding systems, the nubbed belt N10 completes the Synchrodrive belt series. Its high tracking stability means there is no need to fit side flanges. The nubbed belt stays in complete contact with the pulley and ensures the positive meshing of the teeth in both senses of motion.

Areas of application - Conti Synchrocolor timing belts are used in painting lines and skid units.

conti-v multirib® Power, Elast

conti-v multirib

V-ribbed belts are the result of the con- sistent improvement of CONTI drive elements. They com- bine the high flexibility of flat belts with the first-rate power transmission of V-belts.

Conti-v Multirib® V-ribbed belts enable economic solutions even under difficult drive conditions, such as large transmission ratios, high belt speeds, small pulley diameters and back idler pulleys. Drives with fixed centre distances can be achieved without any separate tensioning device, especially with the Elast type.

Areas of application - Conti-v Multirib® V-ribbed belts are ideal for serpentine drives and large transmission ratios. They supplement the series with an effective and high-stress element suitable for compact friction-locked drives in household appliances and heavy machinery.

conti-v® standard

conti-v® standard

Conti-v® Standard Multiflex Twin double-sided V-belts combine temperature and oil resistance with antistatic fea- tures. The double V-profile of the belt makes it suitable for drives with an S-bend and in which both sides of the belt have to be used for transmitting power.

Areas of application - Conti-v® Standard Multiflex Twin wrapped V-belts have been developed for transmissions with more than two axles, where the direction of rotation changes – especially serpentine belt drives on agricultural machinery. The double V-belt is also used for special industrial drives.

conti-v® standard multiflex twin

conti-v® standard multiflex twin

Conti-v® Standard Multiflex Twin double-sided V-belts combine temperature and oil resistance with antistatic fea- tures. The double V-profile of the belt makes it suitable for drives with an S-bend and in which both sides of the belt have to be used for transmitting power.

Areas of application - Conti-v® Standard Multiflex Twin wrapped V-belts have been developed for transmissions with more than two axles, where the direction of rotation changes – especially serpentine belt drives on agricultural machinery. The double V-belt is also used for special industrial drives.

conti-v® standard multiflex non-friction

conti-v® standard multiflex non-friction

Conti-v® Standard Multiflex Non-Friction has a special white jacket for optimum slip control and sound- less clutch engagement. With its tensile member more deeply set, the belt is suitable for operation with backside tensioners.

Areas of application - Conti-v® Standard Multiflex Non-Friction is used for agricultural machinery, special drives in the textile and food industries and as a coupling belt where low friction between belt and pulleys is specially required in order to achieve the coupling effect.

conti-v® advance

conti-v® advance

As v-belts, the conti® ADVANCE heavy-duty cogged raw edge V-belts represent an optimum combination of manufac- turing technique and high-grade materials. They ensure first- class quality and a long service life. Thanks to the fibre-rein- forced polychloroprene compound, the CONTI-V ADVANCE heavy-duty V-belt enjoys a high cross-rigidity, thereby reliably transmitting large forces.

Areas of application - Conti-v® ADVANCE heavy-duty V-belts meet the stringent requirements of modern drive technology and pave the way for new applications in all areas of mechanical engineering for this type of V-belt.

conti-v advance fo® power

conti-v advance fo® power

As raw edge v-belts, conti-v advance fo® power heavy-duty V-belts were specially developed to meet exacting demands regarding power output and smooth running. Due to an improved manufacturing process and optimized materials the FO Power has excellent power ratings and optimum geometry precision. So it ensures a con- stantly high performance with smooth and quiet running.

Areas of application - conti-v advance fo® power heavy-duty V-belts are used in drives with exacting demands for high power output and smooth running.

conti polyflat®

conti polyflat®

Thanks to its high flexibility and traction, the award-winning polyurethane POLYFLAT® belt allows compact drives with considerably smaller pulley diameters compared to conven- tional drives with steel cables. Smaller drive pulleys allow the use of space-saving gear motors. Small-size drive configurations with low inertia not only cut the manufacturing costs, but also lower the energy consumption. The CONTI POLYFLAT has received many commendations and awards for its design and construction.

Areas of application - The property of the conti polyflat® PU flat belt open up numerous new areas of application, e.g. in lifting systems, car washes, forklifts, handling systems and for scissors-type lifting tables.

conti varispeed® varidur, agridur

conti varispeed® varidur, agridur

conti varispeed® drive elements are variable speed belts designed for use in variomatic and variator drives. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding.

Areas of application - conti varispeed® is used in variator drives.

conti-v® multibelt

conti-v® multibelt

Multibelt banded V-belts are used especially on drives with significant impacts as well as highly irregular loads. By virtue of their design, they reliably transmit high torque and power on oscillating drives as well as on drives with large center distances. CONTI-V Multibelt banded V-belts are al- so the ideal solution for friction transmission drives with shafts arranged vertically.

Areas of application - Multibelt banded V-belts are used in farm machinery, rock crushers, fans and wherever large irregular forces must be transmitted over long span lengths.